V’-Rings


V-Rings

V-rings seal are axially against a counter-face. This type of seal has proved to be reliable and effective against dust, dirt, water and oil splash and other media.V-ring seals provide effective protection against dry and wet contaminationand it reduces wear and extends the service life of the oil seal and bearings. It performs well in dry running applications as its all rubber and very elastic, it can be stretched over flanges or other components for easy installation with very little dis-assembly.


VA

Type A ::: with bevel back serves as a pressure less, axial rod seal with a very short mounting length, which is clamped on a shaft. The flexible sealing lip seals a counterface at a right angle to the shaft preventing dirt, dust and splash to enter the construction. Available in the widest range of sizes.

VS

Type S ::: with bevel back serves as a pressure-less, axial rod seal which is clamped on a shaft. The flexible sealing lip seals a counterface at a right angle to the shaft, preventing dirt, dust and splash to enter the construction. Available in all sizes commonly used in agricultural and automotive applications.


VL

Type L ::: with straight back serves as a pressure-less axial rod seal with a very small mounting length, which is clamped on the shaft. The flexible sealing lip seals a counter face at a right angle to the shaft preventing dirt, dust and splash to enter the construction..

End caps

Steel end caps are rubber coated and used to cover a range of holes Size available: Starting from smallest 15 MM OD to 200 MM OD

Circlips

Circlips We offer a full range of internal and external circlips. Circlipsare a type of fastener or retaining ring consisting of a semi-flexible metal ring with open ends which can be snapped into place, into a machined groove on a dowel pin or other part to allow rotation but to stop lateral movement. There are two basic types: internal and external, referring to whether they are fitted into a bore or over a shaft. Circlips are often used to secure pinned connections. Circlips are designed to be removed with special circlip pliers (snap ring tool) which can be reassembled for internal or external clips/p>

How to measure a circlip

At the widest point measure from the outside of the Left edge to the inside of the Right edge.

Copper washer, copper washers kits and bonded(douty) washer kits

Belts